After a total of 6 hour dicking about, I still can’t get the exhaust to fit. This means no installation of the tub, alignment of the bulkhead, fitting of the rock-sliders or forward tanks or any other satisfying jobs until the sodding exhaust is on.
I don’t know whether it’s me or the exhaust, but I can’t get it so that it doesn’t foul the x-member behind the gearbox and the rear left spring shackle. Most positions result in the muffler box knocking against the chassis rail too, and every position with the sections all bolted together pulls the muffler mounting starp well out of line. I think the exhaust is an inch too short in the middle and possible not bent at the correct angle on the tail pipe.
Speak Your Mind
You must be logged in to post a comment.