Winch and Timing Case Breather

I have fitted a mod to the fuel pump plate on the front of the timing case – it now has a breather to prevent water being sucked in through the crank pulley seal when the casing cools down while wading (brass fitting and coiled black plastic pipe visible adjacent  to rad bottom hose).

I have also fitted the Warn XD9000i winch that I got at Billing. I had to refurbish the casing as it was pretty tatty, but it’s fitted and working. I have a fairlead on order, which should arrive on Wednesday, and once that’s on, I’ll be able to fit the wire rope.